Liquid flow control valves control the flow of liquids and steam. The purpose is to hold the pressure of fluids in a pipe. Flow control valves are essential when it arrives at making the system optimized for the operation. There are a lot of flow control valves in the market. It is always good to understand how they work before you buy one for your application. The most effortless control valve is one that starts and stops or opens and closes.
These valves do this to increase or decrease the flow rate of fluids. Ball valves are one of the simplest ones. These valves have a ball attached to a handle, and this makes them easy to use. The valves are also cost-effective, and their performance is perfect. Installing these valves is usually essential. If your installation procedure is wrong, then your performance will be affected. Here are ten things you should look at when you want to install a liquid flow regulating valve.
Consider 10 things after Install a Flow Control Valve.
Never Hold the Control Valve by the Tubing
Tubing always looks the best when you use the handle to lift the flow control valve. But this method is not suitable because you can turn the Tubing itself also. You can also bend the connection point where the nut and a Ferrell are fixed. Also, note that you might destroy the seal to the valve if you turn it a lot. And so, the best way to collect the flow control valve is by using its body. You can also lift it using the hooks on the top.
Install Isolation Ball control Valves
The best way to establish a flow control valve is to installing the isolation ball. You can install an isolation ball valve on both the upstream and downstream sides of the flow control valve. When you want to do repair on your valve, First, you will have to stock the pressure on the upstream completely. The process of cutting off is called the double block and bleed process. The ball always makes this procedure easy to do.
Fix the Flow Control Valve Vertically
You often ask yourself if customers can fix their flow control valves sideways. Usually, these valves should be mounted horizontally. But sometimes, depending on the make of the valve, the piping you will have to install vertically. If you install it without increasing the length of the piping, the tube would be sideways. Always have to install your pipe vertically so that it looks like it is standing upright position.
Check the Failure Point First
Make sure you have to check the failure point of the flow control valve and check the flow control valve’s fail position is suitable for your application. The best way to install the flow control valve is to look at the position indicator to see if the valve is opening or closing before having any pressure.
Check the Gas supply
Wet or poisonous gas will not affect the valve itself. They also affect the pitot. Suppose your valve is not working well. Always test the flow control valve’s vent port, and if it looks dirty, your gas supply is wet. After removing the wet gas, dirt will start to adhere to the moisture. If you are doing this, ensure to move your Tubing to pull supply gas from a high and dry spot. You can as well consider using compressed air for instrument supply.
Check All the Flange Connection
When installing a valve using a flanged connection, make sure to tighten all the nuts bolts. Use a star pattern the way you do it on a car wheel. Also, when replacing a flanged valve, replace the flange gaskets. If you use damaged flange gaskets, you may experience some issues.
On a Threaded Flow Valve Use Sealant
Every time you use a flow control valve with a threaded connection, use a tape or a pipe dope on the threads. It helps to seal the connection to stop leaking, and also it protects the cables.
Know Its Functions and Few Important Points
Before you install a flow control valve, you should read all the important points carefully. Make sure to see if it can stop backflow, start and prevent the flow, or regulate pressure. You will see more details stamped on the valve body by the seller.
Know the Characteristics of the Flow Control Valve
Make sure to know its features after you install a flow control valve. Make sure you have to check the metal constructed and the type of end connection that this meter has. The functional characteristics of the flow control valve can affect how it functions. Checking its end connection, you will be able to know whether or not the valve is fit for installation.
Install Your Flow Control Valve in An Accessible Area
Make sure to install your flow control valve in an easy area and the area with good headroom. Doing this will help it to work well. Make sure the stem position is upwards if possible. Also, check if the system knows if the pressure is flow on the wrong side of the disk. This will prevent the valve from damage.
Most Significant Benefits of Installing Flow Control Valves
The most significant benefit of installing flow control valves is that they help you save money. These flow control valves can maintain the same pressure using less water. You will save water and save bills, which makes these flow control valves the best.
Flow Control valves Help You to Save water
Flow control valves are vital because they help you save water. These valves can save lots of water. Make sure during the dry seasons, and you will have less demand for water supply.
Easy to Install
They are easy to install, and you will not need to call a plumber. Many valves can connect directly to faucets. You will only require simple tools like pliers; also, the process is easy and fast.
Flow control valves are made with an easy and simple logo-free design. Water Flow or rust will not prevent the water flow.
Flow control valves are popular in many industrial areas. They come in many sizes and shapes and are usually used to control the flow of liquids. Always make sure to follow the above points before you install your valve. Doing this will help you to prevent damaging it.